DTS XD10 Especificaciones descargar pdf (Pagina 14)

XD10 Cinema Media Player, Installation and Operating Guide Version 1.0

Films that run 90 minutes or less require only one disc. These films, labeled “one disc only”, can be

placed in either of XD10’s two drives.

Caution: Do NOT insert any other disc into the second drive while loading a single-disc title.

Films running longer than 90 minutes will have two movie discs: one labeled Track A and another

labeled Track B. These discs can be inserted into XD10’s two DVD drives in any order.

Note: On rare occasions, features may have a third disc. In this case, simply load the three

discs one-at-a-time, ignoring messages about “missing” discs.

Any trailers added to DTS movie disc(s) will be listed on the front of each disc.

1.1.3. About DTS Trailer Discs

DTS trailer discs can be inserted into either of XD10’s two DVD drives. These discs are issued to theaters

directly from DTS, with trailer titles listed on them.

Note: Trailers that are not listed on the front of the disc (even though encoded with DTS

timecode) will play in analog only. To verify you have the latest trailer disc, contact DTS

Post Production.

Caution: Do NOT insert multiple trailer discs into the two DVD drives, nor insert a trailer

disc in combination with any movie disc

Note: Use only DTS cinema feature and trailer discs. Music CDs and DVDs for home use

will NOT work in the XD10 Player.

1.2. Basic Operation

1.2.1. Loading a Disc (General)

The XD10 uses DVD/CD-ROM drives (referred to herein as “DVD drives”). Remove the disc from its

case and place it on the DVD/CD tray for loading to the hard drive. If there are two discs, they should be

loaded at the same time using both DVD drives.

Note: Disc(s) can be loaded while a movie is playing. Loading will not interfere with

playback.

1. Power on the unit (if it is not already ON). The Main power switch is on the rear of the unit

(and should always be ON). The Standby / On switch is on the front of the XD10 – turn it

ON.

2. Press the open/close button on either of the XD10’s DVD/CD drives to slide open the tray.

3. Remove any disc(s) that was previously left in the tray(s).

4. Remove the disc(s) you want to load from its case and place it on the tray.

The disc must lay printed-side-up and lay flat in the tray.

5. To slide the tray back into the drive, press the open/close button or gently

push the drawer

inward.

The disc contents will now automatically download. When the download is complete, the

LCD display will show “Complete”. Then press the ENTER button(s) to eject the tray(s).

Operational Overview Document #: 9301E692001.0

1-2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 151 152

Sin comentarios

DTS XD10 Especificaciones Pagina 14